KT EVOD BCC CLEAROMIZER 1.6ml (1.8ohms)

KT EVOD BCC CLEAROMIZER 1.6ml (1.8ohms)

Your Price:$6.95
In Stock

Choose Options

COLOUR
help
*We'll ask for shipping info at checkout
This is similar to the Kanger MT BCC clearomizer for Ego batteries. It is smaller in size and holds 1.6ml e-juice. This comes with a 1.8ohms changeable coil, and has a translucent non-removable mouthpiece tip. The clearomizer is filled from the bottom end. Simply unscrew the bottom metal piece, remove and fill the clearomizer tank then reattach the bottom piece. To replace a coil, simply remove the bottom piece and unscrew the coil and put a new one on. A coil can last from 1-3 weeks before needing to be replaced. If vapour production is weak or the coil doesn't work anymore, simply just replace the coil.
Replacement coils can be found here: KT SOCC COILS (FOR EVOD/PROTANK-2)

Please note: when ordering e-liquid for this tank we recommend thin liquid 60/40 50/50 pg/vg.

5 Stars
Good choice
I just purchased this, but in the time that I've used it here are my thoughts: -Average/good vapour production -Good taste -Little/no break in period -No leaks so far (will post again if it ends up leaking) -Holds enough juice to almost last me a full day (more then enough for when I'm at work/out. Aprox. 9+ hours) -Moderate condensation in the mouth piece (which is expected, but more obvious because of the clear plastic)
Did you find this helpful?  2 of 3 Found Helpful
Reviewed by:  from Victoria. on 5/14/2013
5/5
4 Stars
Great tank to start with and stick with!
I've been using these EVOD BCC tanks since I started vaping in April. I now have 8 of them in my stash & have been very happy with them. these tanks have good vapour production, good flavor, good draw and the 1.5mls will usually last me all day (used to smoke about 1/2-3/4 pack a day). The only thing I would caution about these is using the higher acidity juices in them since the mouthpiece is prone to cracking from chemical attack. Not sure if these are acrylic or polycarbonate but from my experience working in plastics years ago I always tried to go with polycarbonate over acrylic whenever possible as it's always been more resistant to breakage and degradation. Still, for the price, you really can't beat these tanks and the replacement coils are reasonably priced and are easy enough to clean & rebuild yourself for those who are DIY inclined. I can usually get a couple dry burns and at least two re-wraps out of a coil assembly before it's too far gone to rebuild anymore and it's usually the silicone bits that go first. They require a good soak in hot water and then in ethanol in order to purge them completely of the previous flavor. If you replace the standard EVOD BCC coil assembly with a Protank coil, you will get almost the exact same performance out of your EVOD's as if you were running a Protank. Bigger vapour, less restricted draw, less gurgling and if you bore out the intake holes in the EVOD collar a bit and close your eyes you'd be hard pressed to tell the difference between using an EVOD or a Protank. I still have yet to encounter a material defect in one of these tanks but about 1-in-5 of the tanks I buy new need to be messed with in order to get them to perform well. Sometimes the feeder wick on top tends to splay a bit & partially blocks the air flow through the top of the stem. This is even a problem with Protanks so it's really just a problem inherent to the design, materials and manufacturing used. Popping the top stem off the coil assembly and removing or replacing the feeder wick on top with a 2mm or dual 1mm wick usually solves this problem. These tanks would get a full 5 star rating from me if they were slightly higher on the material quality but otherwise it's a good compromise for a reasonably cheap tank. It's likely you will wear off the finish before the tank itself wears out and that's a good balance. If you're not enjoying the vaping experience you're getting from an EVOD then you either got a dud or you're doing something wrong.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Victoria B.C.. on 7/21/2013
4/5
4 Stars
either a miss, or a Barry bonds quality hit
I purchassed 3 of these little guys after burning out a mini-vivi nova tank, and results were very mixed. one of them is amazing, great vapor clouds, barely ever any burn taste, never flooded in 2 weeks of solid use, and never had to fully clean/dry burn between fills. one of the others however, leaked to the point where i blew 6ml of juice out the back over 2 days, and would only taste non burn-y if i held it inverted for 2 draws, then back down to wet the wick every 3rd. ended up having to steal the extra wick layer from my 3rd tank to fix this problem (making great flavor, but restricted air flow.) i would definitely recommend these for anyone starting out, or who likes to swap flavors constantly, but if you are looking for a top quality "wont need to upgrade later" tank, i would look elsewhere *cough*kangerprotank*cough*
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Victoria, BC. on 5/16/2013
4/5
5 Stars
excellent tank in a small package
Bought this a few days ago and I absolutely love it. Nice clean flavour, tons of vapour produced. I would put this up against my T-3's, nova's and vapeonly any day of the week. I was a little wary of the 1.6 ml size but it lasts a good amount of time and I am a chain vaper.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Victoria BC. on 3/9/2013
5/5
5 Stars
Get em!
I highly recommend these. Been using them for 3 years and see no reason to try anything else. Coils are easy to rewick/rewire. Im often surprised by their durability as i drop them daily. VS gets them to me super quick!
Did you find this helpful? 
Reviewed by:  from Terrace, bc. on 4/2/2016
5/5
4 Stars
The Kanger Protank's little sibbling
This is just the baby version of the Kanger Protank. Thick flavorful vapour pretty much every time. The only serious problem I have found with this tank is that the plastic drip-tip is easily cracked and can and usually leak your juice. I fixed some of mine with some crazy glue and it worked great. For those on a budget or those wanting to try its bigger brother the Kanger Protank this tank is for you.
Did you find this helpful? 
Reviewed by:  from Victoria BC. on 5/20/2013
4/5

Recently Viewed Items